Introduction JL-6088PET special glue compliance with international environmental standards, and has been adopted by the EU ROHS SGS testing standards, does not contain toluene solvent, is developed by our special adhesive bonding PET, PVC, PU, ??such as plastic, is based polymer Resin and import reinforced resin body PET multi-component adhesive; Performance Appearance: light yellow viscous liquid Viscosity: 2000-3300cps non-volatile content%: ≥50 shear strength: PET-PET≥6kg / c㎡ acid treatment After up PET-PET≥10kg / c㎡ Features 1, easy to use, fast positioning, high bonding strength, at room temperature or heat curing, non-toxic, etc. After curing; 2, has excellent waterproof, heat, cold, oil, corrosion resistance and high heat resistance without bleaching, tack and strong resistance, aging resistance, permeability and wettability good, non-yellowing properties; the scope of the current bonding EVA, PET, PTR, ABS , PU, ??PVC, nylon, sponge, film, rubber, metal, foam plastics and nonwovens optimum bonding glue. Widely used in home appliances industry, radio industry, decoration, craft toys, insulation materials, packaging and printing industries. Use flat surface treatment: sticky surface cleaning treatment, guaranteed to be sticky surface dry, no oil, no dust when the PET adhesive glue is applied directly to the surface is best to double-sided sticky glue, dry for 10min. -15min, after the solvent has evaporated (with sticky date); if it is loose material can be a second coating, then dry for 15min-25min, direct bonding two surfaces, the pressure to make close contact, at room temperature By placing a higher intensity of use 24H can be reached 72 hours after the highest intensity. Note 1, Note the use of ventilation and prevent contact with fire; 2, after use should be kept covered to avoid solvent evaporation, such as glue is too thick, stir diluted with thinner. Packing 15KG / drum 20kg / plastic barrel shelf life of six months, expired after passing the test, you can continue to use the stored product should be sealed in a ventilated, cool, dry place Statement: Technical data in this article are involved in temperature 25 ℃, the typical data typical humidity of 70% measured in the laboratory environment, not as a product acceptance criteria for reference purposes only. The company guarantees to be true. Does not guarantee that all the data for a particular environment can be achieved, please customers at the time of use, in order to test the data. To make sure that our products meet the requirements. Storage conditions, transportation and other factors will affect the stability and physical and mechanical properties of our products. Any way we can not control the results obtained using polyethylene adhesive force not responsible.